Products

Spare parts for PVS-series variable displacement axial piston pumps and MFS-series fixed displacement axial piston motors.

Single- and double-acting welded hydraulic cylinders MC-series and MCP-series are the best solution for most applications due to their compact and reliable design. They are designed for hydraulic systems with maximum working pressure up to 250 bar. 

- Piston diameter 25...100 mm
- Rod diameter 16...60 mm
- Piston stroke up to 1000 mm
- Maximum working pressure up to 250 bar
- Maximum piston speed 0,5 m/s
- Working temperature range from - 30°C up to + 80°C

Applications:
-Agriculture machinery
-Municipal machines
-Construction machines
-Industrial sector

Double-acting cylinder for hydraulic lift of T-25 agricultural tractors. The tie-rod design has an excellent reparability in the field.

- Piston diameter - 75 mm
- Rod diameter - 30 mm
- Stroke - 110 mm
- Mounting size - 380 mm
- Max. pressure - 200 bar

Double-acting cylinder for hydraulic lift of MTZ, YuMZ agricultural tractors. The tie-rod design has an excellent reparability in the field.

- Piston diameter - 100 mm
- Rod diameter - 40 mm
- Stroke - 200 mm
- Mounting size - 515 mm
- Max. pressure - 200 bar

Fitting for high pressure hoses of various types: DKM, DKR, DKRO, DKOL, DKOS, ORFS, JIC 37°, BANJO and fittings CM, CEL, CES, CORFS, CJIC 37°. Can be made with threaded connections (metric and inch) and connections for flanges with a bend angle from 0° to 90°.

QF-series quick release couplings are interchangeable according to ISO 16028 standard. Rated working pressure - 350 bar. FLAT FACE quick release couplings minimize fluid loss to the environment during disconnection and connection of half couplings. It is not allowed to connect under pressure.

- Interchangeable according to ISO 16028
- Sizes 1/2" to 3/4"
- Rated working pressure 350 bar
- Valve - flat face
- Connection under pressure not allowed
- Ball fixation couplings
- Lock to prevent accidental disconnection of coupling

Screw-to-connect quick coupling QT-series are interchangeable according to ISO 14541 standards. Rated working pressure - 450 bar. Connection is allowed with a residual pressure on one side of no more than 100 bar.

- Interchangeable according to ISO 14541
- Size 1/4"
- Rated working pressure 450 bar
- Conical valve with O-ring
- Connection under pressure allowed
- Threaded fixation of coupling

Push-pull quick-release couplings QR-series are interchangeable according to ISO 7241-A standard. Rated working pressure - 250 bar. It is allowed to connect under pressure.

- Interchangeable according to ISO 7241-A
- Sizes 1/2" to 3/4"
- Rated working pressure 250 bar
- Conical valve with O-ring
- Connection under pressure allowed
- Ball fixation couplings
- «Push-Pull» option

Quick-release couplings series "QS" are interchangeable according to ISO 7241-A standard. Rated working pressure - 250 bar. It is not allowed to connect under pressure.

- Interchangeable according to ISO 7241-A
- Sizes 3/8" to 1/2"
- Rated working pressure 250 bar
- Conical valve with O-ring
- Connection under pressure not allowed
- Ball fixation couplings
- One-way "connection - disconnection" couplings

Sectional control valves for hydraulic systems with flow up to 70 l/min. Simple, cost-optimized design makes this valve an excellent choice for simple hydraulic systems of mobile machinery and equipment.

- Open center
- Flow 70 l/min
- Rated inlet pressure 200 bar
- Maximum pressure at ports A and B 250 bar
- Number of sections - 1...10 pcs

Simple monoblock control valves for hydraulic systems with flow up to 100 l/min. Number of spools - 3 spools. 
They are used in hydraulic systems of agricultural tractors UTB, BELARUS, XTZ, UMZ etc.

- Closed center
- Flow 80-100 l/min
- Rated inlet pressure up to 200 bar
- Maximum pressure at ports A and B up to 250 bar
- Number of spools - 3 pcs
- Handle control

Gear flow divider for hydraulic systems with rated pressure up to 250 bar. Size - group 2. Displacement 6...25 cmᶟ. A good solution for hydraulic systems where synchronous operation of hydraulic cylinders or hydraulic motors is important.

- Displacement 6...25 cm3
- Max. continuous pressure up to 250 bar
- Maximum intermittent pressure up to 280 bar
- Maximum speed up to 4000 min⁻¹
- Flow error - ± 4%

Gear motors for hydraulic systems with rated pressure up to 250 bar. Displacement 6… 71 cmᶟ. Gear motors have a wide range of shafts, flanges and ports according to international standards, which allows them to be used in variety of applications. 

- Displacement - 6,3…71 cm3
- Rated pressure up to 250 bar
- Maximum pressure up to 280 bar
- Maximum speed up to 4000 min⁻¹
- Long service life
- Assembling dimensions according to SAE, DIN, EUROPEAN, GERMAN
- Reversible rotation is avaible
- Built-in valves are avaible

Fixed displacement bent-axis axial piston motors for hydraulic systems with open and closed circuit. Rated pressure up to 400 bar. Displacement 56…107 ccm. These hydraulic motors can be used in hydraulic systems of various machines and equipment.

- High pressure hydraulic motor for closed and open circuits
- Displacement 56…107 ccm
- Rated pressure 400 bar
- Maximum pressure 450 bar
- Low noise level
- High efficiency
- Mounting flanges according to ISO 3019/2
- Built-in hydraulic equipment optionally

Variable displacement axial piston motors for hydraulic systems with open and closed circuit. Rated pressure up to 400 bar. Displacement 160 ccm. Reliable and efficient design has proven itself in the hydraulic systems of mobile machines for various application.

- High pressure hydraulic motor for closed and open circuits
- Displacement 160 ccm
- Rated pressure 400 bar
- Maximum pressure 450 bar
- A wide range of control types
- Cartridge and ISO versions, according to ISO 3019/2
- Low noise level
- High efficiency
- Built-in hydraulic equipment optional

Fixed displacement axial piston motors for open and closed circuit hydraulic systems. Rated pressure up to 420 bar. Displacement 100 ccm. They are used as part of hydrostatic transmissions of travel drive or working equipment of harvesters, road and construction mobile machines.

- High pressure hydraulic motor for closed and open circuit hydraulic systems
- Displacement 100 ccm
- Rated pressure 420 bar
- Maximum pressure 480 bar
- Low noise level
- High efficiency

Fixed displacement axial piston motors for hydrostatic transmissions. Rated pressure up to 420 bar. Displacement 33…112 ccm. MFH-series hydraulic motors are a cost competitive solution for a variety of applications.
These motors meets the requirements of heavy-duty applications in construction, road and agricultural machines.


- High pressure hydraulic motor for hydrostatic transmissions
- Displacement 33…112 ccm
- Rated pressure 420 bar
- Maximum pressure 450 bar
- Low noise level
- High efficiency
- Built-in hydraulic equipment optional
- Compact version for limited space

Fixed displacement axial piston motors for hydrostatic transmissions. Rated pressure up to 350 bar. Displacement 33…90 ccm. MFS-series hydraulic motors are a cost competitive solution for a variety of applications, from agricultural to construction and road-building machines. Time-proven design is reliable and durable in the field.

- Medium-pressure hydraulic motor for hydrostatic transmissions
- Displacement 33…90 ccm
- Rated pressure 357 bar
- Maximum pressure 420 bar
- High efficiency
- Built-in hydraulic equipment optionally

Fixed displacement axial piston bent-axis pumps for hydraulic systems with open circuit and rated pressure up to 350 bar. Displacement 56…107 ccm. Mounting directly on PTO makes these pumps an excellent solution for commercial vehicle applications.

- High pressure pump for hydraulic systems with open circuit
- Displacement 56…107 ccm
- Rated pressure 350 bar
- Maximum pressure 400 bar
- Mounting directly on PTO
- Cast iron body

Fixed displacement axial piston bent-axis pumps for hydraulic systems with open circuit and rated pressure up to 400 bar. Displacement 56…107 ccm. Reliable and efficient design has proven itself to be good at heavy-duty applications. 

- High pressure pump for hydraulic systems with open circuit
- Displacement 56…107 ccm
- Rated pressure 400 bar
- Maximum pressure 450 bar
- Mounting flange according to ISO 3019/2
- High efficiency
- Long service life

Variable displacement axial piston pumps for hydraulic systems with open circuit and rated pressure up to 280 bar. Displacement 18…71 ccm. Compact, reliable design and a wide range of controls system and configurations makes them ideal for a wide range of mobile machines.

- Medium pressure pump for hydraulic systems with open circuit
- Displacement 18…71 ccm
- Rated pressure 280 bar
- Maximum pressure 350 bar
- A wide range of control types
- Mounting flanges according to SAE
- Drive through according to SAE

Variable displacement axial piston pumps for closed circuit hydraulic systems. Rated pressure up to 420 bar. Displacement 100 ccm. These compact pumps with high power density are used as part of hydrostatic transmissions. 

- High pressure pump for closed circuit hydraulic systems
- Displacement 100 ccm
- Rated pressure 420 bar
- Maximum pressure 480 bar
- Low noise level
- High efficiency
- Hydromechanical / electric proportional control system
- Through drive according to SAE

Variable displacement axial piston pumps for closed circuit hydraulic systems. Rated pressure up to 420 bar. Displacement 33…112 ccm. PVH series pumps is a cost competitive solution for a variety of operating conditions. These pumps meets the requirements of heavy-duty applications in construction, road and agricultural machines.

- High pressure pump for hydraulic systems with closed circuit
- Displacement 33…112 cm
- Rated pressure 420 bar
- Maximum pressure 450 bar
- High efficiency
- Hydromechanical/hydraulic proportional/electrical 3-positioned/electrical proportional control system
- Drive through according to SAE

Variable displacement axial piston pumps for closed circuit hydraulic systems. Rated pressure up to 350 bar. Displacement 33...90 ccm. PVS series pumps is a cost competitive solution for a variety of applications, from agricultural to construction and road machinery. Time-proven design is reliable and durable in the field.

- High pressure pump for hydraulic systems with closed circuit
- Displacement 33...90 cm
- Rated pressure 357 bar
- Maximum pressure 420 bar
- High efficiency
- Hydromechanical and electrical 3-positioned control

Gear pumps for hydraulic systems with rated pressure up to 250 bar. Gear pumps available in groups 1, 2, 2.5, 3, 4. Displacement from 1 cm³ to 200 cm³. This pumps have a wide range of shafts, flanges and ports according to international standards. 

- Displacement - 1...200 cmᶟ
- Max. continuous pressure up to 250 bar
- Max. intermittent pressure up to 280 bar
- Maximum speed up to 4000 min⁻¹
- High efficiency
- Long service life
- Assembling dimensions according to SAE, DIN, EUROPEAN, GERMAN standards
- Multiple pumps available

Profit-series group 1 gear pumps are a specially designed solution for hydraulic power packs. 
- Displacement - 1,0...5,8 cmᶟ
- Max. continuous pressure up to 220 bar
- Max. intermittent pressure up to 240 bar
- Maximum speed up to 4000 min⁻¹
- Assembling dimensions GERMAN 2 bolt

Profit-series group 2 gear pumps are a simple, reliable and cost-effective solution for hydraulic systems of mobile machines and equipment.
- Displacement - 4...28 cmᶟ
- Max. continuous pressure up to 230 bar
- Max. intermittent pressure up to 250 bar
- Maximum speed up to 4000 min⁻¹
- Assembling dimensions according to SAE, DIN, EUROPEAN, GERMAN standards.

Gear pumps for hydraulic systems with rated pressure up to 280 bar. Gear pumps available in groups 3 and 4. Displacement from 34 cmᶟ to 150 cmᶟ. Assembling dimensions according to ISO or UNI. Ideal solution for hydraulic systems of mobile vehicles on truck chassis.

- Displacement - 34…150 cmᶟ
- Max. continuous pressure up to 280 bar
- Max. intermittent pressure up to 315 bar
- Maximum speed up to 2800 min⁻¹
- High efficiency
- Long service life
- Direct installation on PTO
- Reversible rotation is available

Gear pumps for hydraulic systems with rated pressure up to 160 bar. Gear pumps available in groups 2, 3, 4. This gear pumps with aluminum body are a cost-effective, but high reliability and durability solution for hydraulic systems of mobile machines and equipment. 

- Displacement - 6...100 cmᶟ
- Max. continuous pressure 160 bar
- Max. intermittent pressure 210 bar
- Maximum speed up to 4200 min⁻¹
- High efficiency
- Long service life
- Assembling dimensions according to GSTU and GOST standards

Gear pumps for hydraulic systems with rated pressure up to 200 bar. Displacement 32, 50 cmᶟ. This gear pumps with cast iron body are a cost-effective, but high reliability and durability solution for hydraulic systems of mobile machines and equipment.

- Displacement - 32, 50 cmᶟ
- Max. continuous pressure 200 bar
- Max. intermittent pressure 250 bar
- Maximum speed up to 3000 min⁻¹
- High efficiency
- Long service life
- Assembling dimensions according to GSTU and GOST standards

Gear pumps for hydraulic systems with rated pressure up to 160 bar. Gear pumps available in groups 3, 4. Displacement from 32 cmᶟ to 100 cmᶟ. Antey-series gear pumps special design allows maintaining high efficiency throughout the entire service life. 

- Displacement 32...100 cm3
- Max. continuous pressure 160 bar
- Max. intermittent pressure 210 bar
- Maximum speed up to 3000 min⁻¹
- High efficiency
- Long service life
- Mounting flanges and shafts according to GSTU and GOST standards

Gear pumps for low pressure lubrication systems with rated pressure up to 16 bar. Displacement 25, 32, 50 cmᶟ. This gear pumps are used in transmissions lubrication systems of tractors and other mobile machines.

- Displacement - 25, 32, 50 cm³
- Max. continuous pressure 16 bar
- Max. intermittent pressure 25 bar
- Maximum speed up to 2400 min⁻¹